Magnetic Assemblies
The Brunel Solar Team Technically Supported by Matthew Swallow
Matthew Swallow, Bunting’s Technical Product Manager, recently visited the Brunel Solar Team in The Netherlands as part of Bunting’s ongoing technical support on the solar car development project. Bunting is supporting the Brunel Solar Team with specialist magnets and technical support in the development of their Nuna 12S solar powered car. The Nuna 12S will…
Read MoreBunting and Force Engineering Design Magnetic Rollercoaster Brake
Bunting and Force Engineering have collaborated to design and build a novel magnetic brake for use on rollercoasters. During the two-year project, the project team considered different permanent magnet arrangements required to generate the braking force needed to slow and stop a rollercoaster cart. The final design used high-power, low-weight neodymium magnets. As a leading…
Read MoreCenex-LCV 2022 Review
Cenex-LCV is the UK’s premier low carbon vehicle event, held at UTAC in Bedfordshire, UK (7-8 September 2022). Our Matthew Swallow, our Technical Product Manager reviews the 2022 event. Promoting a Low Carbon Vehicle Future “The Low Carbon Vehicle Exhibition of 2022 perfectly lived up to its name. This year there were vehicles using every…
Read MoreStray Magnetic Fields and Safety
Bunting is at the heart of the electrification program of the world’s vehicles. By producing magnetising systems that allow for genuinely error-free assembly and providing 100% inline testing, Bunting supports automotive and aerospace programmes looking to create new modes of travel and improve efficiency. Bunting is proud to support this sustainable engineering activity to provide…
Read MorePost-Assembly Magnetisation at Cenex LCV
Post-assembly magnetisation of permanent magnet rotors is the most cost effective and accurate way to produce these vital components for electric vehicle motors. Bunting is promoting such post-assembly magnetising manufacturing techniques on stand C4-607 at the Cenex LCV Event (7-8 September, UTAC, Millbrook, UK). The Cenex LCV Event focuses on low carbon and fuel cell…
Read MoreAdvanced Magnetising Technology at Coiltech Deutschland 2022
Following the success of attending Coiltech Italia in 2021 and a record year for magnetising equipment sales, Bunting is exhibiting at the first Coiltech Deutschland (6-7 April 2022). The Coiltech Deutschland conference and exhibition focuses on materials and machinery for the production and maintenance of electric motors, generators, power and distribution transformers, industrial transformers and…
Read MoreMagnetising Fixture Winding for Magnet Ring Sensor Project
Bunting’s engineering team work with companies on many magnet product designs, from concept through to manufacture. This project focused on the feasibility of designing, manufacturing, and supplying a permanent magnet ring to produce a sinusoidally varying flux density waveform for a sensor application. A sine wave or sinusoid is a mathematical curve that describes a…
Read MoreExhibition Success for Bunting-Berkhamsted
Exhibiting at two shows, in different parts of Europe, over the same two days, was challenging for the Bunting-Berkhamsted team, but proved exceptionally successful. Whilst Matthew Swallow managed the stand at the Cenex LCV event at UTAC Millbrook in the UK, Stefano Maiaroli and Dr Chris Riley were in Pordenone in Italy at the Coiltech…
Read MoreMagnetising and Magnet Technology at Coiltech Italia 2021
With a growth in sales of magnetising equipment and magnet assemblies into Italy in 2021, Bunting-Berkhamsted is exhibiting at the 12th Coiltech Italian 2021 international trade fair (stand 8-D27). Coiltech also hosts the World Magnetic Conference. The exhibition focuses on materials and machinery for the production and maintenance of electric motors, generators, power and distribution…
Read MoreMagnetics Importance for Electric Vehicles at Cenex-LCV
Magnets and magnet assemblies, both essential for transport electrification, are the focus for Bunting on stand C4-106 at Cenex-LCV (UTAC Millbrook Proving Ground, Bedfordshire, UK, 23rd to 24th September 2021). In particular focus is the technique of magnetizing magnet assemblies after construction, which offers a wide range of benefits including accuracy and safety. The LCV…
Read More