Magnetisers & Magnet Setters
Cenex-LCV 2022 Review
Cenex-LCV is the UK’s premier low carbon vehicle event, held at UTAC in Bedfordshire, UK (7-8 September 2022). Our Matthew Swallow, our Technical Product Manager reviews the 2022 event. Promoting a Low Carbon Vehicle Future “The Low Carbon Vehicle Exhibition of 2022 perfectly lived up to its name. This year there were vehicles using every…
Read MoreStray Magnetic Fields and Safety
Bunting is at the heart of the electrification program of the world’s vehicles. By producing magnetising systems that allow for genuinely error-free assembly and providing 100% inline testing, Bunting supports automotive and aerospace programmes looking to create new modes of travel and improve efficiency. Bunting is proud to support this sustainable engineering activity to provide…
Read MorePost-Assembly Magnetisation at Cenex LCV
Post-assembly magnetisation of permanent magnet rotors is the most cost effective and accurate way to produce these vital components for electric vehicle motors. Bunting is promoting such post-assembly magnetising manufacturing techniques on stand C4-607 at the Cenex LCV Event (7-8 September, UTAC, Millbrook, UK). The Cenex LCV Event focuses on low carbon and fuel cell…
Read MoreRemote Magnetiser Monitoring and Problem Solving
Bunting has designed, manufactured, and supplied a large Magnetiser and light-guarded Magnetising Fixture to an Italian electronics company. Prior to despatch, the equipment was subject to a comprehensive two-day factory acceptance test with the customer. During the factory acceptance tests (FAT), Bunting’s commissioning engineers liaised with every stakeholder at the customer, checking on the operating…
Read MoreAdvanced Magnetising Technology at Coiltech Deutschland 2022
Following the success of attending Coiltech Italia in 2021 and a record year for magnetising equipment sales, Bunting is exhibiting at the first Coiltech Deutschland (6-7 April 2022). The Coiltech Deutschland conference and exhibition focuses on materials and machinery for the production and maintenance of electric motors, generators, power and distribution transformers, industrial transformers and…
Read MoreMagnetiser Reaches 1.29 Million Discharges
In 1997, Bunting’s Group Magnetics Engineer Chris Riley commissioned a 30kA 4kj Magnetiser at Bunting’s European magnetic manufacturing and design headquarters in the UK. The bespoke Magnetiser charged a range of specialist magnets and magnet assemblies. Since the original installation, Bunting’s engineering team has annually serviced and calibrated the Magnetiser. Such a proactive approach to…
Read MoreRecord Year for Magnetising Equipment Sales
Sales of Magnetising Equipment in 2021 hit an all-time record high for Bunting’s Berkhamsted, UK operation. The success is the result of ongoing development of a wide range of bench-top and industrial magnetisers, as well as magnet setters. Magnetiser Development Bunting is unique as a company designing and manufacturing both magnetising equipment and magnets. The…
Read MoreMagnetising Fixture Winding for Magnet Ring Sensor Project
Bunting’s engineering team work with companies on many magnet product designs, from concept through to manufacture. This project focused on the feasibility of designing, manufacturing, and supplying a permanent magnet ring to produce a sinusoidally varying flux density waveform for a sensor application. A sine wave or sinusoid is a mathematical curve that describes a…
Read MoreBunting Magnet Test and Development Centre Investment
Bunting has invested in expanding their Test and Development Centre at Berkhamsted in the UK where they specialise in the design, test and build of a wide range of magnet and magnetic technologies. Bunting’s Berkhamsted operation is responsible for the design and manufacture of magnets, magnet assemblies, and magnetising equipment. The range of applications for…
Read MoreExhibition Success for Bunting-Berkhamsted
Exhibiting at two shows, in different parts of Europe, over the same two days, was challenging for the Bunting-Berkhamsted team, but proved exceptionally successful. Whilst Matthew Swallow managed the stand at the Cenex LCV event at UTAC Millbrook in the UK, Stefano Maiaroli and Dr Chris Riley were in Pordenone in Italy at the Coiltech…
Read More