34th Ewing Event: The Road to Fusion

UK Magnetics Society Ewing Event 2022

Matthew Swallow, Bunting’s Technical Products Manager and Vice Chair of the UK Magnetics Society, reports on the society’s 34th Ewing Event held at the University of York in the UK in December 2022 and sponsored by Bunting. The 2022 Ewing Event was entitled ‘The Road to Fusion’ and looked at the magnetic technologies involved in…

Read More

Bunting-Berkhamsted Review 2022

Bunting-Berkhamsted 2022 Review

2022 turned out to be a rollercoaster of a year.  Early post-pandemic positivity was quelled when Russia invaded neighbouring Ukraine, an unacceptable act of aggressive that caused the world’s economy to shudder.  As a result, there was a rise in both material and energy costs.  During the year both Neodymium and Ferrite raw materials rose…

Read More

Medical Magnet Spotlight: Magnets and Cochlear Implants

Cochlear Implants

Magnets feature in a wide range of medical applications including heart pumps, surgical tools, hearing aids, and cochlear implants.  A cochlear implant is a surgically implanted neuroprosthesis that provides a person who has moderate-to-profound sensorineural hearing loss with sound perception.  Unlike hearing aids, which amplify sounds, cochlear implants bypass damaged areas of the ear and…

Read More

Magnetic Sensors Optimise Oil Well Drilling

Magnetic Sensors Optimise Oil Well Drilling

The oil and gas industry continually develops new reserves to meet global energy demands.  Irrespective of the focus on growing energy production from renewable sources, fossil fuels continue to play an important role in providing energy for power stations and transport. There are many drilling challenges when accessing new reserves.  New wells are drilled deeper;…

Read More

Robert Bunting Appointed Bunting® President and CEO

Robert Bunting with Bob Bunting

Robert Bunting follows in the footsteps of his grandfather and father with his appointment as Bunting’s President and Chief Executive Officer.  On the 1st October 2022, Robert succeeded his father, Bob Bunting, in overseeing the continued growth of the global Bunting group.  Bob Bunting assumes the position of Chairman. Bunting® is one of the world’s leading…

Read More

Coatings for Neodymium Magnets

Coatings for Neodymium Magnets

Nearly every neodymium magnet will be plated or coated and, as the most powerful permanent magnet available, they are used in many different applications. However, they possess physical characteristics that require them to be plated or coated in order to protect them from damage. In their raw form, neodymium magnets are quite brittle, and as…

Read More

Cenex-LCV 2022 Review

Bunting at Cenex-LCV 2022

Cenex-LCV is the UK’s premier low carbon vehicle event, held at UTAC in Bedfordshire, UK (7-8 September 2022).  Our Matthew Swallow, our Technical Product Manager reviews the 2022 event. Promoting a Low Carbon Vehicle Future “The Low Carbon Vehicle Exhibition of 2022 perfectly lived up to its name. This year there were vehicles using every…

Read More

Stray Magnetic Fields and Safety

Stray Magnetic Fields and Safety

Bunting is at the heart of the electrification program of the world’s vehicles.  By producing magnetising systems that allow for genuinely error-free assembly and providing 100% inline testing, Bunting supports automotive and aerospace programmes looking to create new modes of travel and improve efficiency.  Bunting is proud to support this sustainable engineering activity to provide…

Read More

Bunting Introduces Carbon Neutral Neodymium Magnets

Carbon Neutral Neodymium Magnets

In response to feedback from European customers, Bunting-Berkhamsted is the first magnet supplier to offer carbon-neutral sintered Neodymium Iron Boron (NdFeB) rare earth magnets sold online through the company’s Bunting-eMagnets ecommerce website. The manufacture of magnets such as NdFeB requires a considerable amount of effort and energy, from mining of the raw materials through to…

Read More

Post-Assembly Magnetisation at Cenex LCV

Magnet Rotor Magnetisation Montage

Post-assembly magnetisation of permanent magnet rotors is the most cost effective and accurate way to produce these vital components for electric vehicle motors.  Bunting is promoting such post-assembly magnetising manufacturing techniques on stand C4-607 at the Cenex LCV Event (7-8 September, UTAC, Millbrook, UK). The Cenex LCV Event focuses on low carbon and fuel cell…

Read More